QMJ Series Ball Mill for gold mining

QMJ series Ball Mill for gold mining features and technical advantages

 high efficiency

Our Ball Mill for gold mining adopts rolling bearing support instead of sliding bearing support with bushings. Therefore, it can save energy by 10-20%.

 Simple structure and convenient maintenance

The Ball Mill for gold mining is mainly composed of a feeding part, a discharging part, a rotating part and a transmission part (reducer, small transmission gear, electric motor and electric control). Convenient installation and debugging, simple operation

High processing capacity and obvious advantages of continuous operation. The production capacity can reach 0.6-260 tons/hour.

Wide range of use. As the old-fashioned grinding equipment on the market, the ball mill has mature technology and stable operation.

QMJ series Ball Mill for gold mining product introduction

The Ball Mill for gold mining is the key equipment for grinding after crushing in the concentrator. It is used to grind various materials such as copper ore, gold ore, magnetite, quartz, lead-zinc ore, etc. into fine powder of 20-75 microns. According to the discharging method, it can be Divided into grate type, overflow type, etc. In addition, the ball mill can be used for dry and wet grinding of various ores and other grindable materials.

Ball Mill for gold mining is a kind of grinder, used to grind materials into very fine powder, mainly used in mineral processing industry. According to requirements, the ball mill can grind various ores and other materials wet or dry. The ball mill consists of a large cylinder that slowly rotates around a horizontal axis. The inner part of the cylinder is filled with the material to be ground and the grinding medium (metal grinding ball). In the cylinder, the medium is lifted to a certain height under the action of centrifugal force, and then falls or falls to grind the ore during the interaction between the balls. The ground feed material enters the cylinder from the hopper at one end, and is discharged from the other end after being crushed by the grinding medium.

QMJ series Ball Mill for gold mining working principle and product display

The material is uniformly transported to the grinding chamber through the hollow shaft. There are step liner, corrugated liner and steel balls of different specifications in the cavity. The centrifugal force generated by the rotation of the cylinder brings the steel ball to a certain height, and impacts and grinds the material. The ground material is discharged through the discharge plate to complete the grinding process. The ball mill is a horizontal cylindrical rotating device, driven by a wheel rim gear, with two chambers and a grid. The material enters the first cavity from the feed port. In the first cavity there are stage lining boards, corrugated lining boards and various steel balls. The rotation of the shell produces eccentricity. This force brings the steel ball to a certain height and then becomes a ball. The gravity drops, which affects and grinds the material. After the initial grinding in the first chamber, the materials enter the second chamber through the isolation screen. The second chamber is equipped with flat liners and steel balls. After the second chamber is crushed, the materials are discharged through the discharge screen.

QMJ series Ball Mill for gold mining Technical parameters

Remarks: 1. Our products are constantly updated and improved. Shanman reserves the right to change the parameters and design without prior notice to the user.

2. The above product configuration is not necessarily the factory standard configuration, please consult in detail when purchasing.

To design a suitable machine, please provide the following information:

1. What kind of stone do you want to crush? Like limestone? Or granite?

2. What is the size of your stone before crushing? How many inches or millimeters?

3. How much capacity do you need? 1t/h? 10t/h? 100t/h?

4. Do you only need a set of crusher or a complete crushing line? (Including feeders, crushers, screens, conveyors, etc.)

5. Do you need a mobile station or a fixed production line?